Info

• Low-cost with industry-leading security features for value-driven IoT networking solution
• NetCloud Perimeter and advanced security for PCI-compliant networking of vulnerable IoT devices
• Embedded Category 1 modem for cost-effective connectivity
• Semi-ruggedized for wider deployment options
• Comprehensive 24x7 support included for business-critical applications
• Extensibility with GPIOs, Router SDK, NCM API for custom solutions and more!

NetCloud Solution Packages with the compact, semi-ruggedized COR IBR200 LTE router are designed for secure, cloud-managed IoT networking. The COR IBR200 enables use of low-cost M2M/IoT data plans from cellular carrier/operators, and with NetCloud Perimeter, addresses the biggest gap in IoT: security.

NetCloud Solution Packages include NetCloud software, the router, and 24x7 support with Limited Lifetime Warranty on hardware.

Upgrade to NetCloud Advanced for additional features, including: Remote Connect / Out-of-Band Management, Advanced VPN and tunneling, and location-based services.

Hardware

• Embedded Cat 1 LTE 10 Mbps Modem
• 1 x 10/100Mbps LAN
• 802.11 b/g/n WiFi
• USB Port
• Metal Chassis
• Wide Operating Temperature: -20° C to 60° C
• Compact Size: 76.5 × 94.5 × 24.5 mm
• 12 VDC Power Input

Cradlepoint COR IBR200 IoT routers are sold as part of an all-inclusive IoT networking package.
NetCloud IoT Gateway Essentials Packages include:
— Compact endpoints, purpose-built for IoT and M2M applications
— A NetCloud Service Plan tailored for branch networking and set for a specific term
— 24x7 support and limited lifetime warranty

Modem Spec
— Technology: LTE, HSPA+
— Downlink Rates: LTE 10 Mbps, HSPA+ 42 Mbps (theoretical)
— Uplink Rates: LTE 5 Mbps, HSPA+ 5.76 Mbps (theoretical)
— Frequency Bands:
— LTE: Band 1 (2100 MHz), Band 3 (1800 MHz), Band 5 (850 MHz), Band 7 (2600 MHz), Band 28 (700 MHz)
— HSPA+/UMTS (Fallback): Band 1(2100 MHz), Band 5 (850 MHz)
— Power: LTE 23 dBm ± 1; HSPA+ 23 dBm ± 1 (typical conducted)
— Antennas: SMA & RP-SMA male plugs, maximum torque not to exceed 4 in-lbs
— Industry Standards & Certs: RC Australia, others pending
— SIM: One 2FF slot
— GPS: No GPS support

What’s in the Box
— IBR200 M2M router with embedded Cat 1 LTE modem; includes integrated mounting holes
— 12VDC 1A power supply adapter, 100-240VAC input (2-meter cord)
— Two (2) LTE modem antennas
— One (1) WiFi antenna
— Safety, Regulatory, and Warranty Guide

Key Features
WAN
— Cat 1 LTE
— Advanced Modem Failure Check
— Failover/Failback
— Standby
— WiFi as WAN
— IP Passthrough
LAN
— VLAN 802.1Q
— DHCP Server, Client, Relay
— DNS and DNS Proxy
— STP
— Multicast/Multicast Proxy
WiFi
— 802.11 1×1 b/g/n 2.4 GHz
— Up to 16 connected devices
— 2 SSIDs
— WPA2 Enterprise
— DynDNS
— AutoQoS
— QoS (DSCP and Priority Queuing)
Management
— Cradlepoint NetCloud Manager
— Web UI, API, CLI
— Data Usage Alerts (router and per client)
— Advanced Troubleshooting (support)
— Device Alerts
— SNMP
— SMS control
— Remote Connect / OOBM
— Client Visibility Control
— Pool data alerts
— SDK support
VPN & Routing
— IPsec Tunnel — up to two concurrent sessions
— IKEv2 support (includes MOBIKE)
— GRE Tunnel
— Traffic Steering
— NAT-less Routing
— Virtual Server/Port Forwarding
— IPv6
Security
— NetCloud Edge Connector for Microsoft® Azure IoT Central
— RADIUS and TACACS+ support*
— 802.1x authentication for ethernet
— Certificate support
— ALGs
— MAC address filtering
— Advanced security mode (local user management only)
— Per-client web filtering
— IP filtering
— Content filtering (basic)
— Website filtering
— Zone-based object firewall with host address (IP or FQDN), port, and mac address
— NetCloud Perimeter compatible
IoT Connector
— NetCloud Edge Connector for Microsoft® Azure IoT Central
*Native support for authentication only. Authorization and accounting not available.
Specifications
The following features are delivered through the hardware.
WAN:
— Cat 1 LTE modem (10/5 Mbps DL/UL)
— One SIM slot
LAN: One LAN 10/100 ethernet port
PORTS:
— Power w/2-wire GPIO (one input, one output)
— One ethernet LAN
— Two LTE cellular antenna connectors (SMA)
— One USB 2.0 Type-A
— One WiFi connector (RP-SMA)
TEMPERATURE: –20° C to 60° C (–4° F to 140° F) operating
HUMIDITY (non-condensing):
— 5% to 95% operating
— 5% to 95% storage
POWER:
— Power input: 12VDC 1A
— Power consumption:
— Conditions: 12V input, room temperature
— Idle: 2.7W (1.8W w/WiFi off)
— Typical: 3.6 W (2.8W w/WiFi off)
— Heavy Usage: 5.8 W
WIFI POWER (FCC):
— IBR200-10M-VZ, IBR200-10M-B-AT, IBR200-10M-C-SP
— 2402–2483.5 MHz (2.4 GHz band): 25.3 dBm conducted
— IBR200-10M-D-EU, IBR200-10M-E-AP
— 2402–2483.5 MHz (2.4 GHz band): 14.99 dBm conducted
SIZE: 3.0 × 3.7 × 1.0 in (76.5 × 94.5 × 24.5 mm)
WEIGHT: 6 oz (175 g)
CERTIFICATIONS:
— PTCRB, FCC, IC, Carrier
— Safety: UL/CUL
— Materials: WEEE, RoHS, RoHS-2, California Prop 65
Modem Spec
— Technology: LTE, HSPA+
— Downlink Rates: LTE 10 Mbps, HSPA+ 42 Mbps (theoretical)
— Uplink Rates: LTE 5 Mbps, HSPA+ 5.76 Mbps (theoretical)
— Frequency Bands:
— LTE: Band 1 (2100 MHz), Band 3 (1800 MHz), Band 5 (850 MHz), Band 7 (2600 MHz), Band 28 (700 MHz)
— HSPA+/UMTS (Fallback): Band 1(2100 MHz), Band 5 (850 MHz)
— Power: LTE 23 dBm ± 1; HSPA+ 23 dBm ± 1 (typical conducted)
— Antennas: SMA & RP-SMA male plugs, maximum torque not to exceed 4 in-lbs
— Industry Standards & Certs: RC Australia, others pending
— SIM: One 2FF slot
— GPS: No GPS support